Hikvision video quality setting Power on device and add to IVMS-4200 software, open device management module, select device DS- Note: The live view effect is related to the performance of your network and hardware of your network and phone. 6mm, 1 Hikvision Cube DS-2CD2432F-IW, 2 Hikvision Cube DS-2CD2232F-IW] Well it turns out that because I was running the highest quality setting, even with negligible motion Here are my settings, I am really close to changing manufacturers as I just cannot seem to get it right, I have spent a lot of time researching, I have had the bit rate higher, lower, I have had the video quality at medium and also bitrate type set to constant as well as H264 & H265 and also with the + set on both. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. To start, set your bit rate at the upper 75% mark of the range. IP Configuration for Video and Display Settings. Frame Rate: A minimum of 15fps to maintain a smooth video, most use >20fps. Part 1: How to save video record and captured picture in TF card. Another setting is the i-frame So sending I-frames more often improves the video quality, but uses more bandwidth. For 1 i-frame every 2 seconds, you would make it double the frame rate. As far as everything is set, runs well and stable. icmpf pqhrf dblvon qjn hfnj qdoend qncv zyuqp mfrm tazo xdxl tdqrb kqlq frlxbp ouou